Skip to content
Guide

Wide plank white oak flooring for Buffalo, MN and the west metro

We install wide plank white oak in homes around Buffalo and the Lake Minnetonka towns, in widths from five to ten inches, solid or engineered. It can be sanded and finished in place, so the boards meet flat with no bevel between them, or installed prefinished when that suits the house and the schedule better.

This guide covers why white oak over red oak, what the width does to the floor, solid against engineered, site-finished against prefinished, hardwax oil, and what moves the price.

Wide plank white oak floor in a lake house living room with a matte natural finish
Wide plank white oak floor in a lake house living room with a matte natural finish

Why white oak, and which white oak

White oak has closed grain, so a spill sits on the surface longer and a stain or oil goes in evenly. Red oak carries a pink undertone that fights pale colors. White oak starts tan to light brown, so a natural oil, a whitewash or a cool gray comes out looking like the sample. It is hard enough for a house with kids and dogs. European white oak tends to have longer, calmer grain and a more even color, and American white oak is slightly harder and more varied.

Choosing a plank width

Each board shrinks and swells across its width, so wider boards mean fewer gaps but bigger ones. That is why width and construction have to be decided together. Width also sets the scale of a room. Five and six inch planks suit a hallway or bedrooms, and eight to ten inches wants a big room with long sight lines and daylight. We bring samples in both so you can lay them on your own floor.

Solid or engineered in a Minnesota house

Solid white oak is one board nailed to a plywood subfloor. Engineered white oak is a wear layer of real white oak glued over a plywood core, and standing on the finished floor you cannot tell the two apart. The decision hinges on humidity. A heated Minnesota house gets very dry in January and humid in July, and engineered plank moves a fraction of what solid wide plank does. For boards over six inches wide we usually recommend engineered. Radiant heat and a slab on grade both point to engineered as well.

Site-finished or prefinished

A site-finished floor is nailed down raw and sanded flat as one surface in the house, so there is no bevel between boards and the finish is easy to renew. A prefinished plank arrives with a hard factory finish and a small bevel on every edge, and you can walk on it the afternoon it goes down. We install both. Prefinished suits an occupied house or a builder with a closing date. Site-finished suits a house you plan to keep for a long time.

Hardwax oil and other finishes on white oak

On a site-finished floor, a hardwax oil soaks into the top of the wood and hardens there. It leaves a matte surface that looks like bare wood, and a scratch or a worn spot can be repaired with a rag of the same oil. A waterborne finish puts a clear film on top of the wood and suits a household with large dogs or one that wants more sheen. Our stains and finishes page covers color.

What moves the price of a wide plank white oak floor

We price a floor after a visit, once we have measured and looked at the subfloor. Species and cut come first, then width, since the price per square foot climbs with each inch. Solid or engineered, the condition of the subfloor, the finish and any stairs make up the rest.

Before you call

Wide plank white oak flooring questions

Is white oak better than red oak for a floor?

For a natural, whitewashed or gray floor, yes. White oak is harder, its closed grain takes stain more evenly, and it has no pink undertone. If you already own red oak and want a medium brown floor, refinishing it is often the better move.

Will wide plank white oak gap in a Minnesota winter?

Every wood floor moves between January and July, and how much depends on the board width, the construction and the humidity in the house. Engineered plank moves a fraction of what solid does. Solid wide plank stays tighter when a whole-house humidifier runs through the winter.

Is engineered white oak real wood?

Yes. The surface is a layer of white oak cut from a log and glued to a plywood core. Laminate and vinyl plank are photographs of wood on a plastic or fiberboard core, which is a different product.

Can a prefinished floor be refinished later?

Sometimes. A solid prefinished floor can be fully sanded, which removes the bevels and the factory finish. An engineered prefinished floor can be sanded only if the wear layer is thick enough.

Start here

Ask about wide plank white oak for your home.

Send a few details and a photo if you have one. We will call to set up a visit and bring samples.

Your details stay with us.

Call Text Consultation